J31 closed single point press

Send Email

Performance characteristics:

1. The machine body is of casting or steel plate structure, linear design, uniform stress, good rigidity and beautiful appearance; Low temperature tempering is used for stress relief.

2. The crankshaft is laid horizontally, and the transmission system is placed on both sides of the machine body. The structure is compact, the layout is reasonable, and the transmission is stable.

3. The rotary key type rigid clutch is adopted, with reliable performance and sensitive action.

4. It is guided by four sided guide rails, with high running accuracy and effectively prolonging the service life of the die.

5. Belt brake, there is a collapse type safety block in the slider to ensure the safety of the press; The structure is simple and convenient for maintenance.

6. Above 200T, pneumatic double balance structure is adopted to balance the weight of sliding block and upper mold, so that the press can run stably.

7. The centralized and decentralized lubrication system is adopted, which is economical and reliable, and ensures that there is sufficient oil in all lubrication parts.

8. The extra large frame with external support improves the stability and safety of machine tool installation and operation.

Main technical parameters of J31 closed single point press:

Technical Parameter		單位	J31-100	J21-125	J21-1600	J31-200	J31-250	J31-315
Sliding block nominal pressure		KN	1000	1250	1600	2000	2500	3150
Rated toque journey		mm	10	10	10	12	12	13
Slide stroke		mm	165	165	180	210	230	250
Stroke times		次/min	35	35	35	35	35	26
Maximum enclosed height		mm	285	370	500	550	600	600
Adjustment of mold height		mm	100	100	100	120	125	125
Distance between columns		mm	660	685	700	720	820	820
Workbench size	around	mm	620	650	680	850	900	1000
	about	mm	620	650	660	700	720	800
	Diameter	mm	250	250	250	320	300	300
Slide bottom plane size	around	mm	300	360	360	480	500	540
	about	mm	360	380	380	480	500	540
Mold handle hole size	Diameter	mm	65	65	65	70	70	80
	depth	mm	120	110	110	110	110	110
External dimensions	around	mm	1780	1745	1635	1975	2100	2460
	about	mm	1670	1670	1880	2030	2440	2440
	tall	mm	2780	2915	3130	3550	4000	4180
Pad thickness		mm	90	90	110	140	140	150
power		KW	7.5	7.5	15	22	30	30
weight		kg	5230	6000	8000	11000	12500	16500

　　Note: If the parameters in this table are inconsistent with the machine tool data, the actual data of the machine tool shall prevail. The Company reserves the right of final interpretation.

熱門產品

YQ32四柱液壓機

WF67K液壓雙缸數控折彎機

通風管道生產設備(各機器型號齊全)

郵件咨詢

　*請在下面表格中提出您的詢問。我們將在48小時內回復您。